Enoxaparin: What to Know Before You Take It
Also sold as Lovenox
FDA Boxed Warning
WARNING: SPINAL/EPIDURAL HEMATOMAS Epidural or spinal hematomas may occur in patients who are anticoagulated with low molecular weight heparins (LMWH) or heparinoids and are receiving neuraxial anesthesia or undergoing spinal puncture. These hematomas may result in long-term or permanent paralysis. Consider these risks when scheduling patients for spinal procedures. Factors that can increase the risk of developing epidural or spinal hematomas in these patients include: Use of indwelling epidural catheters Concomitant use of other drugs that affect hemostasis, such as non-steroidal anti-inflammatory drugs (NSAIDs), platelet inhibitors, other anticoagulants A history of traumatic or repeated epidural or spinal punctures A history of spinal deformity or spinal surgery Optimal timing between the administration of enoxaparin sodium injection and neuraxial procedures is not known Monitor patients frequently for signs and symptoms of neurological impairment. If neurological compromise is noted, urgent treatment is necessary. Consider the benefits and risks before neuraxial intervention in patients anticoagulated or to be anticoagulated for thromboprophylaxis [see Warnings and Precautions (5.1) and Drug Interactions (7) ] . WARNING: SPINAL/EPIDURAL HEMATOMAS See full prescribing information for complete boxed warning. Epidural or spinal hematomas may occur in patients who are anticoagulated with low molecular weight heparins (LMWH) or heparinoids and are receiving neuraxial anesthesia or undergoing spinal puncture. These hematomas may result in long-term or permanent paralysis. Consider these risks when scheduling patients for spinal procedures. Factors that can increase the risk of developing epidural or spinal hematomas in these patients include: Use of indwelling epidural catheters Concomitant use of other drugs that affect hemostasis, such as non-steroidal anti-inflammatory drugs (NSAIDs), platelet inhibitors, and other anticoagulants A history of traumatic or repeated epidural or spinal punctures A history of spinal deformity or spinal surgery Optimal timing between the administration of enoxaparin sodium injection and neuraxial procedures is not known Monitor patients frequently for signs and symptoms of neurological impairment. If neurological compromise is noted, urgent treatment is necessary. ( 5.1 , 7 )
What Enoxaparin Is Used For
1 INDICATIONS AND USAGE Enoxaparin sodium injection is a low molecular weight heparin (LMWH) indicated for: Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1 ) Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2 ) Outpatient treatment of acute DVT without pulmonary embolism ( 1.2 ) Prophylaxis of ischemic complications of unstable angina and non−Q-wave myocardial infarction (MI) ( 1.3 ) Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4 ) 1.1 Prophylaxis of Deep Vein Thrombosis Enoxaparin sodium injection is indicated for the prophylaxis of deep vein thrombosis (DVT), which may lead to pulmonary embolism (PE): in patients undergoing abdominal surgery who are at risk for thromboembolic complications [see Clinical Studies (14.1) ] in patients undergoing hip replacement surgery, during and following hospitalization in patients undergoing knee replacement surgery in medical patients who are at risk for thromboembolic complications due to severely restricted mobility during acute illness 1.2 Treatment of Acute Deep Vein Thrombosis Enoxaparin sodium injection is indicated for: the inpatient treatment of acute deep vein thrombosis with or without pulmonary embolism , when administered in conjunction with warfarin sodium the outpatient treatment of acute deep vein thrombosis without pulmonary embolism , when administered in conjunction with warfarin sodium 1.3 Prophylaxis of Ischemic Complications of Unstable Angina and Non−Q-Wave Myocardial Infarction Enoxaparin sodium injection is indicated for the prophylaxis of ischemic complications of unstable angina and non – Q-wave myocardial infarction, when concurrently administered with aspirin. 1.4 Treatment of Acute ST-Segment Elevation Myocardial Infarction Enoxaparin sodium injection, when administered concurrently with aspirin, has been shown to reduce the rate of the combined endpoint of recurrent myocardial infarction or death in patients with acute ST-segment elevation myocardial infarction (STEMI) receiving thrombolysis and being managed medically or with percutaneous coronary intervention (PCI).
Warnings
5 WARNINGS AND PRECAUTIONS Increased risk of hemorrhage: Monitor for signs of bleeding ( 5.1 , 5.2 , 5.3 ) Risk of Heparin-Induced Thrombocytopenia with or without Thrombosis ( 5.4 ) Thrombocytopenia: Monitor platelet count closely ( 5.5 ) Interchangeability with other heparins: Do not exchange with heparin or other LMWHs ( 5.6 ) Increased Risk of Thrombosis in Pregnant women with Mechanical Prosthetic Heart Valves: women and their fetuses may be at increased risk. Monitor more frequently and adjust dosage as needed. ( 5.7 ) 5.1 Increased Risk of Hemorrhage Cases of epidural or spinal hemorrhage and subsequent hematomas have been reported with the use of enoxaparin sodium and epidural or spinal anesthesia/analgesia or spinal puncture procedures, resulting in long-term or permanent paralysis. The risk of these events is higher with the use of postoperative indwelling epidural catheters, with the concomitant use of additional drugs affecting hemostasis such as NSAIDs, with traumatic or repeated epidural or spinal puncture, or in patients with a history of spinal surgery or spinal deformity [see Boxed Warning, Adverse Reactions (6.2) and Drug Interactions (7) ] . To reduce the potential risk of bleeding associated with the concurrent use of enoxaparin sodium and epidural or spinal anesthesia/analgesia or spinal puncture, consider the pharmacokinetic profile of enoxaparin [see Clinical Pharmacology (12.3) ] . Placement or removal of an epidural catheter or lumbar puncture is best performed when the anticoagulant effect of enoxaparin is low; however, the exact timing to reach a sufficiently low anticoagulant effect in each patient is not known. Placement or removal of a catheter should be delayed for at least 12 hours after administration of lower doses (30 mg once or twice daily or 40 mg once daily) of enoxaparin sodium and at least 24 hours after the administration of higher doses (0.75 mg/kg twice daily, 1 mg/kg twice daily, or 1.5 mg/kg once daily) of enoxaparin sodium. Anti-Xa levels are still detectable at these time points, and these delays are not a guarantee that neuraxial hematoma will be avoided. Patients receiving the 0.75 mg/kg twice-daily dose or the 1 mg/kg twice-daily dose should not receive the second enoxaparin dose in the twice-daily regimen to allow a longer delay before catheter placement or removal. Likewise, although a specific recommendation for timing of a subsequent enoxaparin sodium dose after catheter removal cannot be made, consider delaying this next dose for at least four hours, based on a benefit-risk assessment considering both the risk for thrombosis and the risk for bleeding in the context of the procedure and patient risk factors. For patients with creatinine clearance <30 mL/minute, additional considerations are necessary because elimination of enoxaparin is more prolonged; consider doubling the timing of removal of a catheter, at least 24 hours for the lower prescribed dose of enoxaparin sodium (30 mg once daily) and at least 48 hours for the higher dose (1 mg/kg/day) [see Clinical Pharmacology (12.3) ] . Should the physician decide to administer anticoagulation in the context of epidural or spinal anesthesia/analgesia or lumbar puncture, frequent monitoring must be exercised to detect any signs and symptoms of neurological impairment such as midline back pain, sensory and motor deficits (numbness or weakness in lower limbs), bowel and/or bladder dysfunction. Instruct patients to report immediately if they experience any of the above signs or symptoms. If signs or symptoms of spinal hematoma are suspected, initiate urgent diagnosis and treatment including consideration for spinal cord decompression even though such treatment may not prevent or reverse neurological sequelae. Use enoxaparin sodium with extreme caution in conditions with increased risk of hemorrhage, such as bacterial endocarditis, congenital or acquired bleeding disorders, active ulcerative and angiodysplastic gastrointestinal disease, hemorrhagic stroke, or shortly after brain, spinal, or ophthalmological surgery, or in patients treated concomitantly with platelet inhibitors. Major hemorrhages including retroperitoneal and intracranial bleeding have been reported. Some of these cases have been fatal. Bleeding can occur at any site during therapy with enoxaparin sodium. An unexplained fall in hematocrit or blood pressure should lead to a search for a bleeding site. 5.2 Increased Risk of Bleeding following Percutaneous Coronary Revascularization Procedures To minimize the risk of bleeding following the vascular instrumentation during the treatment of unstable angina, non – Q-wave myocardial infarction and acute ST-segment elevation myocardial infarction, adhere precisely to the intervals recommended between enoxaparin sodium doses. It is important to achieve hemostasis at the puncture site after PCI. In case a closure device is used, the sheath can be removed immediately. If a manual compression method is used, sheath should be removed 6 hours after the last intravenous/subcutaneous enoxaparin sodium injection. If the treatment with enoxaparin sodium is to be continued, the next scheduled dose should be given no sooner than 6 to 8 hours after sheath removal. The site of the procedure should be observed for signs of bleeding or hematoma formation [see Dosage and Administration (2.1) ] . 5.3 Increased Risk of Bleeding in Patients with Concomitant Medical Conditions Enoxaparin sodium should be used with care in patients with a bleeding diathesis, uncontrolled arterial hypertension or a history of recent gastrointestinal ulceration, diabetic retinopathy, renal dysfunction and hemorrhage. 5.4 Risk of Heparin-Induced Thrombocytopenia with or Without Thrombosis Enoxaparin sodium may cause heparin-induced thrombocytopenia (HIT) or heparin-induced thrombocytopenia (HIT) with thrombosis (HITTS). HITTS may lead to organ infarction, limb ischemia, or death. Monitor thrombocytopenia of any degree closely. Use of enoxaparin sodium in patients with a history of immune-mediated HIT within the past 100 days or in the presence of circulating antibodies is contraindicated [see Contraindications (4) ] . Circulating antibodies may persist for several years. Only use enoxaparin sodium in patients with a history of HIT if more than 100 days have elapsed since the prior HIT episode and no circulating antibodies are present. Because HIT may still occur in these circumstances, the decision to use enoxaparin sodium in such a case must be made only after a careful benefit-risk assessment and after non-heparin alternative treatments are considered. 5.5 Thrombocytopenia Thrombocytopenia can occur with the administration of enoxaparin sodium. Moderate thrombocytopenia (platelet counts between 100,000/mm 3 and 50,000/mm 3 ) occurred at a rate of 1.3% in patients given enoxaparin sodium, 1.2% in patients given heparin, and 0.7% in patients given placebo in clinical trials. Platelet counts less than 50,000/mm 3 occurred at a rate of 0.1% in patients given enoxaparin sodium, in 0.2% of patients given heparin, and 0.4% of patients given placebo in the same trials. Thrombocytopenia of any degree should be monitored closely. If the platelet count falls below 100,000/mm 3 , enoxaparin sodium should be discontinued. 5.6 Interchangeability with Other Heparins Enoxaparin sodium cannot be used interchangeably (unit for unit) with heparin or other low molecular weight heparins as they differ in manufacturing process, molecular weight distribution, anti-Xa and anti-IIa activities, units, and dosage. Each of these medicines has its own instructions for use. 5.7 Increased Risk of Thrombosis in Pregnant Women with Mechanical Prosthetic Heart Valves Use of enoxaparin sodium for thromboprophylaxis in pregnant women with mechanical prosthetic heart valves may result in value thrombosis. In a clinical study of pregnant women with mechanical prosthetic heart valves given enoxaparin (1 mg/kg twice daily) to reduce the risk of thromboembolism, 2 of 8 women developed clots resulting in blockage of the valve and leading to maternal and fetal death. No patients in the heparin/warfarin group (0 of 4 women) died. There also have been isolated postmarketing reports of valve thrombosis in pregnant women with mechanical prosthetic heart valves while receiving enoxaparin for thromboprophylaxis. Women with mechanical prosthetic heart valves may be at higher risk for thromboembolism during pregnancy and, when pregnant, have a higher rate of fetal loss from stillbirth, spontaneous abortion, and premature delivery. Therefore, frequent monitoring of peak and trough anti-Factor Xa levels, and adjusting of dosage may be needed [see Use in Specific Populations (8.6) ] .
Contraindications
4 CONTRAINDICATIONS Enoxaparin sodium injection is contraindicated in patients with: • Active major bleeding • History of immune-mediated heparin-induced thrombocytopenia (HIT) within the past 100 days or in the presence of circulating antibodies [see Warnings and Precautions (5.4) ] • Known hypersensitivity to enoxaparin sodium (e.g., pruritus, urticaria, anaphylactic/ anaphylactoid reactions) [see Adverse Reactions (6.2) ] • Known hypersensitivity to heparin or pork products Active major bleeding ( 4 ) History of heparin-induced thrombocytopenia (HIT) within the past 100 days or in the presence of circulating antibodies ( 4 ) Hypersensitivity to enoxaparin sodium ( 4 ) Hypersensitivity to heparin or pork products ( 4 )
Enoxaparin Drug Interactions (4)
Check Enoxaparin against your full medication list in our free Interaction Checker
Most-Reported Side Effects
Based on 56,439 reports in the FDA Adverse Event Reporting System (FAERS). Reports do not prove the drug caused the effect.
Explore full Enoxaparin safety data in our free FDA Safety Explorer
FDA Recalls (3)
Correct Labeled Product Mispack: Bags labeled for Enoxaparin Sodium Injection, 80 mg/0.8 mL, contained Enoxaparin Sodium Injection, 30 mg/0.3 mL
Recalling firm: Cardinal Health Inc.
CGMP Deviations: Products were exposed to temperatures outside of the products labeled storage conditions.
Recalling firm: CARDINAL HEALTHCARE
Labeling: Label Error on Declared Strength. A single syringe labeled as 150 mg/1.0 mL was found packaged in a blister labeled as 120 mg/mL
Recalling firm: Sanofi-Aventis U.S. LLC
This information is educational — not medical advice.
This page is provided for general educational purposes and summarizes publicly available data from sources such as the U.S. Food & Drug Administration. It is not a substitute for the judgment of a licensed clinician and should not be used to start, stop, or change any medication. It may be incomplete or out of date, and individual circumstances vary. Always talk with your prescriber or pharmacist about your specific medications and health conditions. If you think you may have a medical emergency, call 911.